The Bunker

A few days past Christmas festivities, we are happy to show you the latest advancements downstairs. You may remember the original Man Cave Pekka build two years ago in the small room located next to the bathroom. This room is now serving mostly a storage space and will soon be converted to a guest room, thus meaning that the "Man Cave" functionalities will finally relocate underground, more specifically to the bunker.

Step in and have a peak!

The original table and shelves from the Man Cave have already been reinstalled to the new location and Pekka and has started to build a suspended ceiling. According to our thinking, this seemingly "unnecessary" structure will be important element creating a more "room-like" feel for the Man Cave, rather than the space being just a cellar (as it actually, in reality is). It is all about the details, isn't it?

The first phase of the installation

Similarly to the laundry room, also the bunker has fluorescent tube lighting. What is different between the two is that the main part of the bunker lighting will be hidden behind the ceiling slats.

Hidden fluorescent tube housings

Placing the fluorescent tubes above the ceiling hides the light sources and makes the light penetrate through the slats. On the way down the light picks up a warm wooden tone and creates a cozy, inviting atmosphere.

Light shining through the slats

The bunker will have two separate lighting modes that can also be turned on simultaneously. The first switches on the fluorescent tubes above the ceiling. The second operates the work lights above the table similarly to Pekka's set up in the original Man Cave.

General vs. working lights 

General vs. working lighting 

During a recent visit and the semi-mandatory tour around the apartment, Pekka's aunt wondered if Pekka is having a "slat-period" in his life. Yes, he has indeed built a suspended ceiling in the laundry room using a similar approach and yes, also the downstairs teak wall is made of slats. But rather than Pekka's personal obsession, the rationale revolves more around the warmth and scandinavian look of the structure. So when the decision needed to be made regarding the bunker ceiling, we didn't think two minutes of not adding this mid century twist to the overall slat mix.

Getting there...!

As of today, Pekka has installed about 15 square meters of ceiling. Once again, we quite like how it is materializing.  Over the Holiday break he will continue the project and once there are further concrete results, we will of course post an update for you to review.

Our Holiday Wishes

Once again, it is time to wish you all Happy Holidays! It has been an eventful year, and now it feels absolutely fantastic to slow down for a while and just concentrate on those things which in the end, matter the most in life: family, friends and quiet moments. 

CHRISTMAS POEM by SOFI and URHO, vol. 3

Building excitement as Christmas is nearing

Learning to sing all those carols I’m hearing

I know there are elves that see if I scream

Behave very nicely or frequently steam.

I whisper to Urho “Santa will be here soon”

We light up the candles, finish chores by noon

Thinking those fun things we did this past year

Done work on the house and travelled far and near.

Playing the piano with mum is a blast

Who cares if the keys and the tunes don’t yet match?

In kitchen I’m always ready to help

Only watching’s not fun, need to try it myself!

The underground chaos is nearing to end

Dad’s building and fixing, teak wall’s being mend

We are crafting a snowman in a bunker brand new

Where both noise and a mess are quite welcomed too!

In day care I’ve made some friends and learned games

We do not slow down for rainier days

With smile on her face can mum close the gate

When going to work she knows I’ll be great!

My brother or sister will be born in the spring

I’ll be really nice, do the big-sister thing

In a few years time we’ll be playing as team

Secret hut in the bunker is just one scheme I see!

Wishing you wonderful Holiday moments

Gingerbread cookies, candles and presents

Hope your road finds what your heart needs the most

And for New Year’s magic you’d be raising a toast!

MERRY CHRISTMAS and HAPPY NEW YEAR of 2015!

Focus on the cookies!

Ja vielä suomeksi...

On tullut jälleen aika toivottaa hyvää joulua. Vuosi on ollut vauhdikas, ja nyt on upeaa hetkeksi pysähtyä ja keskittyä asioihin, jotka ovat kaikkein tärkeimpiä: perheeseen, ystäviin ja kiireettömiin hetkiin. 

SOFIN ja URHON JOULURUNO, vol. 3

Jännitys hirmuinen, luukut jo avaan

Jouluisten laulujen sanoja tavaan.

Ikkunan raosta tontut ne valvoo

Olenko kiltti vai nouseeko haloo?

Urhon kanssa me lasketaan jouluun öitä

Jo kynttilät syttyy, vähän jäljellä töitä.

Monta juttua kivaa mahtuu vuoteen tähän

Koti kuntoon tulee, ja on reissattu vähän.

Mamman kanssa on soiteltu “Oravanpesää”

Ja kuvia katsellen muisteltu kesää.

Kun leivotaan, taikinaa haluan mä maistaa

Omat pullat ja piparit uunissa paistaa.

Isi maan alla raataa, usein sirkkeli laulaa

Hiki pinnassa puurtaa, rimat paikalleen naulaa.

Me maalataan, liimataan yhdessä siellä

Eikä sotkua, melua, kukaan nyt kiellä.

Päiväkodissa mukavat puuhat ja pelit

Ei hidasta menoa syksyiset kelit.

Voi hymyillen vilkuttaa aamulla mamma

Ei päivällä huolta se minusta kanna.

Mamman mahassa kasvaa mun veli tai sisko

Sitä silittää aion, en tukasta kisko.

Kun vähän se varttuu, me leikitään kaksin

Ehkä kellariin maja tehdään naruin ja saksin.

Joulun juhlaan toivomme riemua, rauhaa

Tonttujen saloja, puuroista kauhaa

Rentoja hetkiä, yhteistä aikaa

Tähtien loistetta, jouluista taikaa!

RAUHALLISTA JOULUA ja ONNEA UUDELLE VUODELLE 2015!

Teak wall - once more!

Never before has a single project required so much effort during the past 2.5 years than the slat wall in the downstairs lobby. Sourcing the teak started nearly a year ago, and since then Pekka has been relentlessly working on the different wall components. Finally, there is a light in the end of a teak tunnel.

162 teak slats

Also, the rest of Project Downstairs is moving forward. A few weeks ago a plumber installed a central heating radiator weighing just under 100 kg, so Pekka's assistance was once again welcomed to allow easy installation. The timing is perfect - the weather is finally starting to get a bit colder. This year winter seems to take forever to begin and even now, in late December, there is no snow in sight in the Southern Finland. But when the snow and cold finally take over we'll be ready: in addition to the radiator the downstairs is secured with 227 meters of floor heating cable underneath the slate.

Radiator

Pekka has been slaving to finalize the assembly of the slat wall in order to allow Kaitsu, our trusted electrician to finish the lighting (including the led-light system) and installation of the sockets. And as a result of their combined efforts, the darkness turned into light during the first week of December. 

24V transformer ready to be hidden

The slat wall has two openings for a satellite cable and for electricity. The first one is located close to the window on the bottom right corner of the wall. The second one is approximately in the middle of the wall and will be covered by a TV creating a visually "cable-free" outcome.

TV socket before

Pekka still needs to build hatches to cover both sockets. The hatches will allow electricity plugs to pass through even when closed, and they have been cut from the slats located the socket area. Naturally, this is to ensure both the tone and pattern of the grain will be a perfect match allowing a visual continuity.

TV socket. Hatch missing.

The led light was attached in two rows to an aluminium strip on top of the teak slats. Quite an intense moment to see the interaction of the led and the slat wall for the first time...

To the right

To the left

Finally - switch it on! The effect created by the led light is stunning. With a color temperature of 5500K the light reproduces the surrounding colors in a very natural way.

With a trace of disco feel...!

We are extremely pleased with how Project Slat Wall is becoming reality. The overall visual image of the downstairs lobby including slate floor and teak slats is spot on mid century modern. Perfect match to what we originally imagined!

Lights on!

Most of the work including the floor, ceiling and walls is now done. We still lack quite a few small details including for example doors, which might be a relatively considerate next step especially for potential house guests. We also have ambitious plans regarding the furniture and lights, but these are put on hold to balance the budget a bit before rushing into new investments - unless, of course, we run into something absolutely irresistible in some random auction.

Ceiling, floor and walls

Last but not least - a sneak peak of this years Christmas card! As an annual example of the seamless teamwork Minna prepares the layout and text and Pekka has the primary responsibility of the photo shoot. This year, naturally, we wanted to conduct the shoot downstairs and yes, you might already guess who the models (whose willingness for seamless teamwork seems to be a bit variable and require bribing in a growing degree) will be...

Ho ho ho!

New name, new opportunities: Olive Green!

We have been writing this blog under the name of Olive Green Window for about 2.5 years. Somewhere along the way an idea was born: perhaps one day we'd expand a bit, go beyond just blogging. But evolution takes time, and we did not want to rush things.

During the past two years, it has been a pleasant surprise to see a solid growth in the number of viewers. Opportunities for different collaborations have also appeared. Certain services have also been identified where Pekka's expertise could be valuable to an MCM enthusiast or a DIY soul.

So we decided to start a small business. Naturally, the name would reflect what we have already been doing, so an obvious choice was to name the business after the blog. Unfortunately, to avoid confusion with another local business, we could not choose Olive Green Window.

After a bit of thinking, the decision was to drop the word "window", and go with a simple solution - "Olive Green". Thus the name of the blog will soon be changed to Olive Green, but everything else - the writers, the content and the other key characters, including Urho, will remain the same.

Dear readers, we ever so kindly thank you for your continuous interest, and hope you keep on enjoying what we have to offer!

Sincerely,

Minna & Pekka

Heads up: For sale!

For all of you who adore Scandinavian Modernist architecture, here is an intriguing opportunity! One of the ten units in our apartment building will be soon for sale. The apartment is located in the west end of the complex, and as an additional bonus has a window facing west and an additional skylight.

The photos are a courtesy of the realtor, Huoneistokeskus and are published upon request of the seller, a former architect, who wishes to find new owners who appreciate the modernist architecture and mid-century spirit of the apartment.

Urho the birthday dog

It was a double celebration in our family yesterday. First, it was the National Father's Day, Pekka's third. More importantly, it was also Urho's fourth birthday. Thus it now seems appropriate to let His Sausageness to tell a bit of his special day.

"Just like today, I love sleeping in. As long as it is warm and no one moves my blankets I don't really care about anything else. Especially if it is raining. If I can hear the rain drops, there is no way I will react unless I have to."

Yes, he is there!

"Hmmm...am I right or is there something going on I should be aware of? This smell is somehow familiar...yes, it is bacon! And if I interpret the not so very subdued sounds of a two year old helping to prepare a surprise Father's day breakfast, I think I may have a chance to score my share." 

Driven by the scent of bacon

"Too bad, no luck with bacon this time. But let's check out what is happening outside instead. Still not quite comfortable with these funky stairs. They should install some kind of a special ramp for us sausages."

Equally careful progression

"This is the far frontier of my territory. Fortunately it is not too cold. How boring, though, that due to these autumn related cleaning activities neither of my wing persons is available for a bit of exploration. Pity, I think I might have smelled another dog nearby. Or a rabbit. Not quite sure."

Alert as always

"I don't really get what they are doing running up and down the hill, probably it has something to do with these leaves. Whatever it is, I'm quite enjoying the ride in a padded wheelbarrow."

Convenient downhill travelling

"For a dachshund I think I'm pretty skilled in striking a pose (incentives need to be attractive, of course). Naturally I'm quite handsome, but that I manage to look intelligent and brave as well. After all, I have four years of experience of doing the traditional birthday shoot."

The Official Birthday Photo

"We shoot a couple of other options as well, none of those quite as flattering to my figure as the photo above. However I fully recognise some humans just can't get enough of us dachshunds, and thus I gave my permission to publish them all."

"Eventually, enough was enough. After all, it was getting a bit chilly and damp so it was time to go back inside. And there had been some rumours of a special birthday treat including frankfurters..."

Are we ready yet?

"And yes, there it was. Not much of a visual masterpiece, but who cares - the rumour regarding the frankfurters was true! Aah, simple pleasures of life are very much appreciated!"

Just say the word...!

Early Edition 670 & 671, Part II

This post actually belongs to a series of updates dealing with a restoration of an early series 670 & 671, or better know as the Eames Lounge chair. The "series" might sound a bit of an overstatement as as the last related story was released almost one year ago...yes, point taken - we really need to shape up a bit! Anyhow, if you want to revisit the earlier parts you can find them here: 1 & 2.

So, back to the key character of the story - The Chair. After the initial assembly and first inspection (the chair had been disassembled for transportation) it was evident it needed to be disassembled again and work on the separate components should begin.

The frame

The first thing to do was to remove the cushions. It was easy to just unclip and slide them off the panels. Then off came the armrests, which are fixed in place with three screws in this early model. Later models have only two screws attaching the armrests to the metal brackets.

Early armrests with three screws

Next, the metal brackets on both sides of the chair fixing the backrest to the rest of the assembly were separated by removing four screws. When loosening the screws one should be very careful as the weight of the backrest starts quickly forcing the backrest down and if not supported properly, the wooden parts can easily break. Subsequently, the two backrest panels were separated from each other.

Armrest metal bracket

After the rosewood seat and backrest panels were taken apart from each other the die casted aluminum base was detached from the seat and ottoman panels. This was done by loosening four screws. 

Ottoman base

Once the chair was fully disassembled to individual components its dirtiness was even more evident. The entire structure was covered with years of dirt combined with a suspicious mix of old surface treatments. Additionally, the wood panels were very dry and desperately screaming for some oil.

Rosewood seat panel

Before the wood could be retreated with oil it was important to wash the panels throughly. A good approach is to use steel wool together with some sort of cleansing liquid. Pekka used a commercial cleansing liquid made specifically for furniture (there are several brands available to choose from). Alternatively, you could also choose to use methylated spirit or mineral spirits for cleaning. Whatever your preference, it is important first to try it on an area which is not visible to the eye, such as an area covered by a cushion. It is also good to do the cleaning in a well ventilated area or even outside as the evaporating fumes will make your head hurt if working in a closed, small space.

Seat panel - before

Pay attention when using steel wool on veneer. Rub it only to the direction of the grain, otherwise you might scratch the wood and leave unwanted marks. Be also careful when working on the areas where brand labels are located as you don't want to damage them either.

Use clean rags or household towels once you start rubbing the wood with cleansing liquid. As soon as the dirt starts coming off the panels do not smear it all over the panel, but rather wipe it off with a clean rag. Next, add more fresh cleansing liquid to the steel wool and repeat the same procedure to the rest of the panel.

Working with steel wool

After the panels are clean and dry it was time to start the most rewarding part of the restoration: applying the oil. Again, patience is a virtue: the oil can't be applied on a wet wood, ever. Depending on the ambient conditions and preferrer cleansing liquid with you may need to wait for a few hours or even to the next day just to be sure all the liquid have evaporated from the surface to be treated.

Panel-oil and a dachshund's snout

There are several types of oils to choose from. Some brand names indicate what the product actually contains (such as pure tung oil) and others are just names (such as tung oil finish) created by marketeers and might have little or nothing to do with the actual oil composition. The content of these products usually varies being usually a blend of some sort of oil, varnish and hardener, and perhaps not be the best choice for a vintage chair. Whichever oil you choose make sure you know how it will behaves on the surface to be treated, just to avoid any unpleasant surprises. Originally, Herman Miller used gun stock oil - so take a wild guess what Pekka chose for our chair?

Half washed, half oiled

After careful cleaning and treating, it is certainly a pleasure to see how the oil gives richness to the wood tones and really makes the grain pop. Yes, freshly oiled Rio palisander is indeed one of the prettiest sights we know!

Freshly oiled rosewood

In the next part of the series (promised, it will not take another year) we will show what happened to the base, domes of silence and the shock mounts. So please stay tuned!

DIY acoustic slat wall

So, it's been a long while. It seems that we are currently in a midst of a period when there are so many different things ongoing simultaneously that in the end it seems extremely difficult to find the appropriate time for...well, basically anything. But better late than never - now we are back and quite exited to share with you our experiences on how to construct an acoustic slat wall!

Half way there

For the last two moths, as boring and slow it might sound, Pekka has been sanding and oiling teak slats made of material sourced from Tiikki.com. The bunker has proven to be an absolute necessity allowing the isolation of this kind of smelly and dusty work, which when for example left to dry does not conflict with everyday life. To date,  nearly half of the wall is ready, the other half waiting to be finished before the first week of December when the electrical work including the indirect lighting of the slat wall will be finished.

Never ending row of teak slats

We also needed close to 15 square meters of acoustic panels for the slat wall, and as a result of some research work, found an excellent material provider option from Finland: Konto. Especially here in Finland Konto is recognized for its innovative acoustic products made mainly of peat moss. Specifically, we would like to thank Sami Laitila from the Konto Team for is expertise and kind customer service. If you have any needs regarding acoustic panels, do not hesitate to contact Sami!

Twenty acoustic panels and a non-acoustic dacshund

There are several reasons why we ended up choosing Konto. First, we preferred a Finnish product with solid acoustic capabilities minimizing the echo created by the slate floor. Second, the Konto panel works exceptionally well in the slat wall sandwich structure Pekka created. The panels are rigid enough not to squeeze together too much, and they have a tough outer surface that will not break easily. Third, as the panels are mainly made of peat moss it is a sustainable product matching our renovation philosophy.

Beautiful surface texture of Konto acoustic panel 

Konto acoustic panels are also very easy to resize with a stanley knife. Afterwards, a cut panel edge  can be "re-closed" with  heat for example using a flat iron. After this, the edge can be painted, leaving no visible cues of previous modifications. Pekka needed to do some detailed cutting for a vent that is located at the top part of the wall. He also sliced a very thin, round piece of the panel in order to clue it on the top of the vent lid. This enables unification of the surface texture with the rest of the wall. Now the only missing part is a slat hatch.

Missing a slat hatch

Other important piece what was needed for the wall is a ten meter LED stripe, which will be a light source for an indirect wall light. We found the components from Adlux (highly recommended material provider). There were two important considerations. First, these LEDs provide a light with a color temperature of 5500K, which is very close to the day light color temperature. This kind of lighting conditions compliment the surrounding colors in the best possible way. Second, these LEDs can be dimmed, which we considered very important to be able to adjust the amount of light to match the different uses of the space.

Ten meters of LED

Next to the construction of the slat wall. First, an acoustic panels is "squeezed" between teak slats (in front) and a board of plywood (on the back), creating a sandwich structure. All these three elements are then attached together with screws from behind.

Sandwich structure

The wall itself is also modular. The width of each module was determined by the width of Konto panels (594 mm). Pekka started building the modules with a sheet of plywood and then adding an acoustic panel on top.

Ready for the slats

Then he placed the teak slats prepared with love and patience on top of the plywood-panel base.

Each module requires 18 teak slats

The idea was to have a fixed space between each slat leaving the black acoustic panel partly visible on the back. This was achieved by using pieces of wood as spacers allowing Pekka to control the gaps between slats while completing the screwing phase.

Slats & spacers

Pekka had also pre-clued stripes of printed paper to the back of each plywood element. These stripes helped to determine the screw marks with precision allowing easy assembling.

Crosses marking the spot

Slats & gaps

Once each module was completed, the next step was to attach it up on the wall with screws. Leaving an empty slat space to each end of the module enabled fixing the modules with screws from front up to the wall. Later, single slats will be glued to cover the empty spaces, hiding the screw heads and creating an illusion of a perfectly screwless entity.

Fixing gap on side of the module

On the very bottom we left a small space between the slats and the slate floor, which determined by the choice of material is a bit uneven. This appeals to us visually, as the slight unevenness is not so noticeable, but it also has a functional aspect. We will be using the space to hide electrical wires etc. behind a black hatch made of Konto material. 

Once again, even if it is an extremely slow process where counting the working hours makes absolutely no sense, we are really happy to see how the finished half of the slat wall looks, and can't wait to share the rest of the story with you!

To be continued